Dimming your Spider LEDs

If you have upgraded to the latest version of Spider firmware, you will be able to dim the LEDs on the keypad by pressing and holding the Mark button. After one second the LEDs will start dimming, and will dim down and then light up again. Release the Mark button at the desired brightness.

Applies to

  • Spider 3
  • Spider 5
  • Spider 6
  • Spider 7
  • Spider 8

Notes The LED brightness is reset every time the power is cycled on the Spider.

Dimming LEDs

If you have any trouble or if you for any other questions, please contact support@spidertracks.com