Data from the Flightcell DZMx can be viewed on the spidertracks website alongside the tracking data from your existing Spiders. You can either have your data sent to Spidertracks from an existing Iridium Value Added Reseller if you already have a contract in place for the data, or you can have the data sent direct to Spidertracks from the unit. Please take note of some limitations and pricing:
|Breadcrumb enhanced tracking||Not available in initial release|
|Geofence||Is not available|
|GPRS/GSM Inbound Tracking||Is not available|
|Mark button||There is only Mark 1 Notification available|
|Mark button one custom message||Can be customised|
|Outbound configuration messages||Is not available|
|Radius||Not implemented in initial release|
|Remote settings changes||Not available through spidertracks website|
|SMS||Not available through spidertracks, can activate with different supplier|
|SMS Inbound||Is not available|
|SOS Distress Cancel||This does not close the SOS|
|Tracking when using voice||No tracking points will be sent when the phone is in use.|
|Voice||Not available through spidertracks, can activate with different supplier|
|Watch Mode||Is not available in this initial release|
If you want to have a different tracking provider register the unit with Iridium, the DZM will be placed on the Flightcell DZM Light Plan, otherwise it will be placed on the DZM Standard Plan. Pricing does not include any applicable taxes.
DZM Standard Plan
DZM Light Plan
|Monthly Fee||USD 25.00||USD 12.00|
|SOS SMS||USD 0.50||USD 0.50|
|Notification SMS||USD 0.20||USD 0.20|
|Each Position Report||USD 0.12||USD 0.06|
|Activation Fee||USD 100.00||USD 100.00|
To setup a Flightcell DZM unit, please email firstname.lastname@example.org with these details:
- Your company name
- Your contact phone number
- The aircraft registration
- The IMEI of the DZMx
- Found by going to Menu > Diagnostics Menu > Sat Device Details
- The Serial number of the DZMx
- Found by going to Menu > Diagnostics Menu > Firmware Version
- And if you would like to register it direct with spidertracks, or have the data come from another supplier.
- If from another supplier, please send through their information.
Once we have this information we will be able to start the process of getting you setup.
Please note that you must do the following in order to activate the DZM with Spidertracks:
1.- DZM units must have the latest firmware in order to work with the Spidertracks website. See Flightcell's support website for more information.
The latest firmware as of January 2018 is V2.17.0
2.- Enable the 'Aircraft Power Up' message within the DZM unit. To do this, you will need to enable the installation menus first by going to Menu > Hardware Config > Installer Menu Enable and entering the pin which is 2468.
The Aircraft power up message activation is provided in Menu > Tracking > Triggered Events.
If you have any questions, please don't hesitate to contact Flightcell support at email@example.com